The machine is capable of installing cables, conduits and pipes up to 150 mm in diameter. All tooling is included for drilling up to 20m and back reaming in clay & sand up to 200mm dia.
This unique Under Road Boring machine gives contractors the versatility of a small light weight drill rig combined with real power. You can even use the hydraulic system of your mini excavator to power the bed borer B06.
This unit is 1.75m in length and only 0.46m wide. This allows access to backyards throught normal household doors where the conventional rigs can't go.
The engineered simplicity and versatility make this rig an ideal tool for electricians involve in the NBN for example, telecommunication cable and fiber optic, plumbers and any other contractors associated with trenchless installation of small underground services.
+ Hydraulic Power Pack + 2x craddles hosting 20m of drilling rods + 1000L of water with a high pressure system
Bed Borer B06 - Specifications and Data | |
| Micro Borer System | Model B06 |
| Torque (max): | 1,150Nm (850 lbft) |
| Speed Range: | 0 - 100 rpm |
| Thrust (max): | 6.5T (14,500 lb) |
| Stroke (3 stage): | 1219mm (48") |
| Base Rig Dimensions: | 1750mm L x 460mm W x 1200mm H |
| Pipe Sizes Installed: | Up to 200mm diameter |
| Boring Distances: | 20m dependant on ground conditions |
| Operating Pit Size: | 2m dia. / 2 x 1m rect |
| Guidance System: | Digitrak SE |
| Hydraulic Power Pack: | 25Hp Petrol Engine 70 Lpm (19 GPM) @ 2000 PSI |
By signing up below you will receive an email with a link to download the B06 Micro Borer Brochure for FREE. More info
The Pilot Tube Micro Tunnelling machine can perform in a wide range of soil conditions. The process is extremely precise with deviations from target less than +/- 20mm (3/4") over 70m (230').
It is particularly suited for gravity sewer application where a high level of accuracy is required. A wide variety of pipe materials can be installed including Concrete, Steel and PVC Piping.
Once a shaft has been created at both the start and end of the planned installation line, the Pilot Tube Micro Tunnelling B750 is lowered into position. A pilot tube is then driven underground towards the target shaft.
A cutter head, screw conveyor and the pipe to be installed are then attached and jacked behind the pilot tube hole. The cutter head bores through the soil as new segments of the pipe are attached and driven forward.
Once the pipe has reached the target shaft, the auger and casing inside the pipe are extracted completing the pipeline.
For a 360 degre view of our B750 Micro Tunneler 50T push, click here.
| Pilot Tube Micro Tunnelling B750 - Specifications and Data | |
| Pilot Tube System | Model B750 |
| Torque (max): | 3,500Nm (2600 lbft) |
| Speed Range: | 0 - 100 rpm |
| Thrust (max): | 50T (110,000 lb) |
| Stroke (3 stage): | 1219mm (48") |
| Base Rig Dimensions: | 2050mm L x 1250mm W x 1450mm H |
| Pipe Sizes Installed: | Up to 450mm diameter |
| Boring Distances: | 60m dependant on ground conditions |
| Operating Pit Size: | 2.4 dia / 2.4 x 1.5m rect |
| Guidance System: | Electronic Theodolite c/w 90 Deg, eye piece, 10 sec. accuracy |
| Hydraulic Power Pack: | Detroit VM Turbo Diesel Engine 62kW (80Hp) @ 2600rpm (cont. rating.) 200 Lpm (54 GPM) @ 2000 PSI |
By signing up below you will receive an email with a link to download the Pilot Tube Microtunneling brochure for FREE. More info
This Pilot Tube Micro Tunnelling machine gives contractors the versatility of a small light weight drill rig.
The B110 pass through a standard household door
This unit is 2.25m (89") in length and only 0.6m (24") wide. This allows access into those confined spaces where the conventional rigs can't go. This Pilot Tube Micro Tunnelling Machine and its power pack can even be negotiated through a standard household door for access in back yards of private residences.
Maximum accuracy
The micro tunneler B110 is specifically set up to install 150mm (6") dia sewer and drainage pipe to grade and line. Bore length in excess of 30 m (90') and grades of 1 in 200 have been achieved with this unit in depth to 4m (13 ft) below ground level.
A Multipurpose Micro Tunnelling System
The Pilot Tube Microtunneling machine can also be configured as a directional drill rig and can even be fitted with an air hammer to drill through solid rock for non grade holes.
Drainers! Plumbers! That is the one!
The engineered simplicity and versatility make the B110 microtunneling machine an ideal tool for drainers, plumbers and any other contractors associated with trenchless installation of underground services.
| Pilot Tube Micro Tunnelling B110 - Specifications and Data | |
| Torque: | 1,400 Nm (1033 lbft) |
| Thrust: | 11T (24,250 lb) |
| Pullout: | 6T (13,230 lb) |
| Dimension: | 2100mm L x 600mm W x 1200mm H |
| Mass: | 200 Kg (440 lb) |
| Tooling: | 20 m of 70 mm (66' of 23/4") Pilot Rod System 20 m of 100 mm (66' of 4") Auger System 1 x 150 mm (6") Cutting Head |
| Guidance System: | Electronic Theodolite |
| Power Source: | Remote, Kohler 25 Hp petrol engine 19 kW (25 Hp) at 3600 rpm 70Lpm (19GPM) at 2000 PSI |
| Notes: | The machine is supplied complete for installation of 20m bores |
By signing up below you will receive an email with a link to download the Pilot Tube Microtunnelling Brochure for FREE. More info
Light Weight drill rig with real power
This unique machine gives contractors the versatility of a small light weight drill rig combined with real power.
Go where the other cannot
This unit is 1.90m (75") in length and only 0.75m (30") wide. This allows access into those confined spaces where the conventional rigs can't go.
Ideal for sewer and drainage pipes
The machine is specifically set up to install 150mm (6") - 300mm (12") dia PVC sewer and drainage pipe to grade and line. Bore length in excess of 60 m (200') and grades of 1 in 200 have been achieved with this unit in depth to 6m (13ft) below ground level.
Use it as a directional drill rig as well
The micro tunneler B250 can also be configured as a directional drill rig, and can even be fitted with an air hammer to drill through solid rock, however sewer accuracy can't be guaranteed in these conditions.
Very popular in the drain & plumbing industry
The engineered simplicity and versatility make this rig an ideal tool for drainers, plumbers and any other contractors associated with trenchless installation of underground services.
| Pilot Tube Micro Tunnelling Machine B250 - Specifications and Data | |
| Pilot Tube System | Model B250 |
| Torque (max): | 2,250Nm (1660 lbft) |
| Speed Range: | 0 - 150 rpm |
| Thrust (max): | 25T (55,000 lb) |
| Stroke (3 stage): | 1219mm (48") |
| Base Rig Dimensions: | 1900mm L x 750mm W x 1200mm H |
| Pipe Sizes Installed: | Up to 300mm diameter |
| Boring Distances: | 60m dependant on ground conditions |
| Operating Pit Size: | 2.4 dia / 2.4 x 1.5m rect (8' dia or 5' rectangular) |
| Guidance System: | Electronic Theodolite c/w 90 Deg, eye piece, 10 sec. accuracy |
| Hydraulic Power Pack: | Detroit VM Turbo Diesel Engine 62kW (80Hp) @ 2600rpm (cont. rating.) 200 Lpm (54 GPM) @ 2000 PSI |
For more information, download the brochure today!
By signing up below you will receive an email with a link to download the Pilot Tube Microtunneling Brochure for FREE. More info
Pilot Tube Micro Tunnelling Machine and Bed Borers are particularly suited for gravity sewer, water and drainage underground pipelines as well as telecommunication cable and conduit for the NBN (Fiber Optic), National Broadband Network
Pilot Tube Micro Tunnelling system particularly suited for gravity sewer in harsh ground ...read more
Where a high level of accuracy is required, our Pilot Tube Micro Tunnelling machines and Bed Borers are most suited to soft ground conditions such as sand, soft clays and mixed ground condition.
NO DIG Equipment manufactures Pilot Tube Micro Tunnel Boring machine and Micro Under Road Borers from the highest quality to fit the highest requirements.
These Under Road Boring machines are specifically designed to install in-grade pipelines and gravity applications.
A wide range of material can be installed such as PVC, clay, concrete and fiberglass pipes. You can be sure to be on target 100% of the time.
For more information, get the brochure today!
By signing up here you will receive an email with a link to download the Pilot Tube Micro Tunnelling Brochure for FREE. More info
Perfect for Gravity Sewer & Drainage Pipelines
Our microtunneling machines are used for installation of pipelines to exacting grade and line, as required for gravity sewerage or drainage systems. They can be utilize as directional drill rig as well with drilling blades and transmitter housing with Digitrak.
Up To 450mm in Diameter
We can offer microtunneling equipment which can install pipe sizes from the smallest conduits through to 450mm in diameter.
Pipes made from PVC, steel, earthenware fiberglass and concrete can be installed with our microtunnelling machines.
3 Pilot Tube Micro Tunnelling Machines
Our Pilot Tube Micro Tunnelling equipments can be used in soft ground conditions such as sand, soil and soft clays.
Steerable
Accuracy is achieved by installing a steerable pilot tube, using ground displacement. Once the target hole is reached a microtunnelling reamer is attached and the pipe is installed. Ideal tor installation of PVC and other 1m pipes . These microtunnelling machines are fast to set up and pipe can be installed within hours.
From the smallest conduit to 450mm in Dia
No Dig Equipment manufactures a range of pilot tube microtunneling systems to cater for pipe sizes from the smallest conduit (NBN & Fiber Optic for example) through to 450mm in diameter in the harshest ground condition.
