Our Aussie Made No Dig Mole under road boring tools, are tough tools made for tough Australian conditions and specifically designed for under road boring utility services.
You can install buried cables, conduits and small pipes without digging-up roads, driveways and footpaths!
Get rid of the reinstatement cost & keep the profit in-house!
All No Dig Moles feature the convenient quarter turn forward and reverse control. Operators can quickly change direction by simply rotating the air supply hose quarter of a turn.
Check out our No Dig Moles we have for sale.
| Specifications | ||||
| Diameter | Length | Weight | Air Consumption | Max. Pressure |
| 45 mm (1-3/4in) | 910 mm (36in) | 8 kg | 18 cfm | 760 kpa (110psi) |
| 54 mm (2-1/8in) | 1220 mm (48in) | 11 kg | 22 cfm | 760 kpa (110psi) |
| 65 mm (2.5in) | 1100 mm (43in) | 20 kg | 30 cfm | 760 kpa (110psi) |
| 76 mm (3in) | 1380 mm (54in) | 34 kg | 40 cfm | 760 kpa (110psi) |
The hammer head provides the No Dig Mole with rapid penetration and accurate direction for under road boring, even in the toughest soil conditions.
NO DIG Mole utilises a bare minimum of moving parts which ensures greater durability and reliability.
Fewer moving parts ensures that our under road boring Mole last the distance. This also makes them easier to service with local parts readily available.
Going Trenchless with our Aussie Made No Dig Mole for under road boring, will eliminate the cost and the hassle of traffic management along with the complaints that go with it.
Traffic management can be a very costly exercise and can involve many resources, as nearly every road closure (in Australia) needs to follow Australian Standards and must pass local Shire regulations.
Re-instatement can be one of the most costly items on any trenching job. Therefore going trenchless realy makes sense.
Repair of road pavements, footpaths and concrete driveways are time consuming and costly. Things like pattern concrete and red asphalt driveways can be very difficult to match and sometimes requires removal of very large section in order to get the repair to blend.
Contractors avoid disturbing pavement, roads and landscaped surfaces which, greatly reduces the need to restore asphalt or concrete once the job is completed.
Realise fantastic savings by using the NO DIG Mole to install Telecommunication cables, Fiber Optic (for the NBN), Electric cables, Gas, Water & Retic pipes under roads, footpaths and driveways.
The single best place to use a pneumatic mole is when you need to run lines beneath finished structures that are too expensive, disruptive, or difficult to excavate.
Driveways and Sidewalks: Avoid costly concrete cutting, cracking, and expensive reinstatement fees.
Roads and Highways: Run utilities across busy streets without disrupting traffic or requiring road closures.
Railways: Safely cross beneath tracks without disturbing the heavy-load surface geometry.
Traditional trenching turns manicured properties into muddy construction zones. Use an impact mole to preserve:
Established residential lawns, flower beds, and golf courses.
Commercial pathways and paved courtyards.
Root zones of mature trees, avoiding environmental damage and municipal fines.
Moles excel at establishing fast “keyhole surgery” connections from a main municipal line directly to a building or home. It is perfect for laying:
Fibre optic (FTTH) and telecommunications conduits.
Water mains and lead pipe replacements.
Gas line and underground electrical services.
Irrigation system supply lines.
Unlike massive horizontal directional drilling (HDD) rigs or heavy excavators, the No Di Mole system is compact and highly portable. It should be used in:
Cramped backyards with narrow side-gate access.
Tight basements or narrow launch pits (pit-launched setups).
Urban alleyways where heavy machinery cannot fit.