Tungchip hardfacing is a technique where tungsten chip is directly deposited onto the weld matrix of the hardfacing material.
Providing our drill bits with excellent toughness and superior wear resistance for prolonged tool life.
This drill blade provides one of the most cost effective solutions for drilling in Hard Pack Clay and Rocky ground conditions.
These blades provide reduced torque in hard ground conditions, which means you require less power, this saves tool life, wear and tear on your machine.
| Crocodile | |
| Part # | |
| For Vermeer® 7 hole bolt pattern, 3" cut, suit D711 | BCV80 |
| For Vermeer® 6 Hole bolt pattern, 4" cut, suits D2022 - D2440 | BCV100 |
| For Vermeer® 6 hole bolt pattern, 5" cut, suit D3650 & up | BCV125 |
| For Ditch Witch® 5 Hole bolt pattern, 3" cut, suits JT922 | BCD80 |
| For Ditch Witch® 5 Hole bolt pattern, 4" cut, suits JT2020 - JT2720 | BCD100 |
| For Ditch Witch® 6 Hole bolt pattern, 5" cut, suits JT30-40 | BCD125 |
| Bear Claw | |
| Part # | |
| For Vermeer® bolt pattern, 7 Hole, 3.5" cut, suit D7x11 | BBV80 |
| For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40 | BBV100 |
| For Vermeer® bolt pattern, 7 Hole, 5.25" cut, suit D24x40 | BBV125 |
| For Ditch Witch® 5 Hole bolt pattern, 3" cut, suits JT922 | BBD80 |
| For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2720 | BBD100 |
| For Ditch Witch® 6 Hole bolt pattern, 5" cut, suits JT30-40 | BBD125 |
The Bear Claw is a must for any directional drillers tool box. The cutting teeth on this directional drilling blade provides great cutting action in pinnacle limestone and other mixed ground conditions. Balistic carbide cutters allow ripping through tough rock, whilst still providing great steerability in sandy and soft ground conditions.
This directional HDD bit is ideal for sand and loam soil conditions.
An economical long lasting blade that continues to perform in sandy ground conditions.
| The Sand Blade | |
| Part # | |
| For Vermeer® bolt pattern, 7 Hole, 3" cut, suit D7x11 | BSV80 |
| For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40 | BSV100 |
| For Vermeer® 6 hole bolt pattern, 5" cut, suit D3650 & up | BSV125 |
| For Ditch Witch® 5 Hole bolt pattern, 3" cut, suits JT922 | BSD80 |
| For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2020, JT2720 | BSD100 |
| For Ditch Witch® 6 Hole bolt pattern, 5" cut, suits JT30-40 | BSD125 |