The DigiTrak ARES is a next-generation HDD locating system designed to help drill crews locate, track and steer underground drill heads with greater confidence.
ARES combines an AI-powered locating system, SuperCore transmitter, advanced frequency scanning, real-time depth information, GPS tracking and a redesigned user interface to simplify HDD locating in challenging ground conditions.
With the ability to scan 8,000+ wideband frequencies, ARES can automatically identify suitable frequencies for the jobsite, helping operators spend less time managing signal selection and more time drilling.
| Specification | DigiTrak ARES |
|---|---|
| Frequency Options | 8,000+ |
| Wideband Range | 4.5–45 kHz |
| Maximum Depth | Up to 49 m* |
| Data Range | Up to 85 m* |
| Transmitter | SuperCore |
| GPS | Built-in |
| Connectivity | Bluetooth & Wi-Fi |
| Locator Battery | Up to 12 hours |
*Actual range depends on transmitter, ground conditions, interference and setup.
The ARES is used to locate and track underground drill heads during HDD projects.
It is suitable for:
ARES is designed for HDD contractors looking for an advanced locating system with:
The DigiTrak ARES is suited to HDD contractors, civil construction companies and utility installation crews working across telecommunications, electrical, water, sewer and other underground infrastructure projects.
It is particularly useful for contractors working in areas where signal interference can make locating more challenging.
The ARES features a redesigned display that provides clear information about the drill head while drilling.
Operators can monitor:
The system also supports Wi-Fi software updates and built-in GPS tracking.
ARES works with the DigiTrak SuperCore transmitter, an all-in-one transmitter designed for advanced HDD locating.
SuperCore provides:
The ARES system is designed for full-day HDD locating work.
The locator provides up to 12 hours of operating time, depending on conditions and usage.
The locator uses USB-C charging and can be fully charged in approximately three hours according to the current No Dig Equipment product information.
The SuperCore transmitter can provide up to 100 hours of battery life, depending on configuration and operating conditions.
Actual battery performance will vary according to transmitter power, frequency, signal conditions and jobsite environment.
No Dig Equipment supplies a range of DigiTrak locating systems for different HDD applications.
| Feature | DigiTrak ARES | Falcon F2+ | Falcon F1 |
|---|---|---|---|
| AI-powered scanning | Yes | No | No |
| Wideband frequencies | 8,000 | Yes | No |
| Wideband range | 4.5–45 kHz | 4.5–45 kHz | 9–13 kHz |
| Sub-k capability | Yes | No | No |
| Rebar capability | SuperCore | Available with compatible transmitter | No |
| GPS tracking | Yes | — | — |
| Best suited to | Advanced HDD & challenging sites | General HDD | Entry-level / simpler work |
The Falcon F2+ and F1 remain useful options for different HDD applications, while ARES is positioned as the next-generation DigiTrak locating platform.
The DigiTrak ARES is an advanced HDD locating system used to track underground drill heads during horizontal directional drilling.
ARES can locate up to approximately 49 m deep when used with the appropriate transmitter and setup.
ARES provides access to 8,000+ wideband frequencies.
ARES uses the DigiTrak SuperCore transmitter.
Yes. ARES is suitable for HDD applications including telecommunications, fibre and NBN installation.
Contact No Dig Equipment to discuss the ARES, SuperCore transmitter and accessories for your HDD requirements.
