Directional Drilling Swivels
Pullback swivels are a necessary and important part of every Horizontal Directional Drilling jobs.
The swivel has to be able to stand up to not only the tensile forces caused by the pullback, but also the rotational forces and the side loads caused by rocks or certain other conditions.
For this reason the bearings in our swivels are suitable for absorbing both thrust and radial loads. Our swivels have specially designed seals to prevent ingress of dirt to the bearings which would cause premature failures. The seals can withstand mud, grime and anything else found underground and are designed to be easily serviceable.
|
NEW Dub Swivel
Dub Swivel
|
|
Part # |
|
5-ton Dub Swivel
|
SWD5
|
|
9-ton Dub Swivel
|
SWD9
|
|
20-ton Dub Swivel
|
SWD20
|
|
35-ton Dub Swivel
|
SWD35
|
|
Choose the right HDD Swivel for your Directional Drill
Choosing the right pulling swivel should be determined by the capacity of the machine, not just the load being pulled. When selecting a pulling swivel, one should select a unit with equal or greater capacity than the machine it will be used on. Don't hesitate to contact us to help you choosing the right pullback swivel for your next Horizontal Directional Drilling job.
Receive our Pulling Swivel price list by email
Receive a special offer by downloading our new HDD Tooling Catalogue.
|
5-ton Swivel, 9-ton Swivel and 16-ton Swivel below. See table for the other size.
For your reamer subs, click here to see our range
With a simple Pulling Eye Adaptor, turn your swivel a dub swivel. For available sizes see the table.
Vermeer Quick Connect thread adaptor to suite 5, 9 & 16T swivels. These adaptors are suitable for standard Vermeer back reamers, or for simply connecting small packages straight to the Starter Rod when back reaming is not required.
|
Swivels
|
|
Part # |
|
5-ton Swivel, 70mm dia, 296mm total length
|
SW5
|
|
9-ton Swivel, 76mm dia, 330mm total length
|
SW9
|
|
16-ton Swivel, 110mm dia, 432mm total length
|
SW16
|
|
|
|
|
20-ton Dub Swivel
|
SWD20
|
|
35-ton Dub Swivel
|
SWD35
|
|
|
|
|
Pulling Eye adaptor for 5 T swivel
|
SP5
|
|
Pulling Eye Adaptor for 9 T Swivel
|
SP9
|
|
Pulling Eye Adaptor for 16 T Swivel
|
SP16
|
|
|
|
|
Vermeer Quick Connect for D7x11
|
SSV711
|
|
Vermeer Quick Connect for D16x20, D20x22, D24x40
|
SSV2440
|
|
Ditch Witch Quick Connect for JT1720, JT2020
|
SSD2020
|
Find out how competitive our swivels are
price - quality - longevity
by simply downloading the Catalogue and receive a special offer
|
Click here to see
our range of
|
Swivels
