Tungchip Hardfacing
Tungchip hardfacing is a technique where tungsten chip is directly deposited onto the weld matrix of the hardfacing material.
This provide excellent toughness and superior wear resistance for prolonged tool life.
Now available on all our blades as standard.
The Crocodile
This blade provides one of the most cost effective solutions for drilling in Hard Pack Clay and Rocky ground conditions.
These blades provide reduced torque in hard ground conditions, which means you require less power, this saves tool life, wear and tear on your machine.
- Surrated Carbide blades for cutting the hardest conditions
- Taped design to reduce torque in compact ground conditions
- Additional hardfacing and extra-wear protection
Crocodile | |
| Part # | |
| For Vermeer® bolt pattern, 7 Hole, 3" cut, suit D7x11 | BCV80 |
| For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40 | BCV100 |
| For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2020, JT2720 | BCD100 |
Bear Claw | |
| Part # | |
| For Vermeer® bolt pattern, 7 Hole, 3.5" cut, suit D7x11 | BBV80 |
| For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40 | BBV100 |
| For Vermeer® bolt pattern, 7 Hole, 5.25" cut, suit D24x40 | BBV125 |
| For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2720 | BBD100 |
The Bear Claw
The Bear Claw is a must for any directional drillers tool box. The cutting teeth on this directional drilling blade provides great cutting action in pinnacle limestone and other mixed ground conditions. Balistic carbide cutters allow ripping through tough rock, whilst still providing great steerability in sandy and soft ground conditions.
- Carbides cutter shred through the hardest soil
- Hardfacing along all wear edges improve blade life
- Hole in blade allows direct pullback for small packages
- Made from hardest bissaloy steel for high wear resistance
The Sand Blade
This directional HDD bit is ideal for sand and loam soil conditions.
An economical long lasting blade that continues to perform in sandy ground conditions.
- Hardfacing along all wear edges improve blade life
- Made from bisalloy plate for high strength and wear resistance
- Tungchip hardfacing for maximum wear resistance
Sand Blade | |
| Part # | |
| For Vermeer® bolt pattern, 7 Hole, 3" cut, suit D7x11 | BSV80 |
| For Vermeer® bolt pattern, 7 Hole, 4" cut, suit D16x20, D20x22, D24x40 | BSV100 |
| For Ditch Witch® bolt pattern, 5 Hole, 4" cut, suit JT1720, JT2020, JT2720 | BSD100 |
